ISSN 2093-274X (Print)
 ISSN 2093-2480 (Online)

Aim and Scope of the International Journal of Aeronautical and Space Sciences

The International Journal of Aeronautical and Space Sciences (IJASS) encourages submission of papers addressing all aspects of aerospace science and technology, which include acoustics, aerodynamics and fluid mechanics, aerospace telecommunications, airworthiness and maintenance, avionics, combustion and propulsion, flight dynamics, guidance and control, flight simulation and operations, low carbon manufacturing, nano application, plasmas and lasers, research instrumentation and facilities, space exploration, structural dynamics and aeroelasticity, structures and materials, and thermomechanics and reacting flows. The journal also addresses the ground and flight tests of aerospace systems including aircraft, air ship, helicopter, microelectromechanical system, missile, satellite, rocket, and UAV.
The Korean Society for Aeronautical & Space Sciences (KSAS) is the largest and the most prestigious society for aerospace engineers and scientists in Korea and would also like to maintain our highest standing in the English language journal publication by soliciting high quality research papers. As of 2012, IJASS is indexed by SCIE, SCOPUS and KCI.
Starting from 2012 vol 13 (1), IJASS has been accepted for coverage in Science Citation Index Expanded (SCIE). The Korean Society for Aeronautical & Space Sciences (KSAS) is pleased to announce that the publications of our journal, IJASS (International Journal of Aeronautical and Space Sciences) have been selected for coverage in Thomson Reuter’s product and services.

Publication Charge

In order to maintain a high quality of IJASS, all manuscripts accepted on or after March 1st, 2015 will be charged a publication fee of $300 (300,000 KRW) for 8 published pages and $100 (100,000 KRW) for each additional page.
The authors can apply for a waiver of publication charge when the paper is accepted for publication. Depending on the significance of the paper and the contributions of the authors to IJASS, a full or partial waiver of publication charge will be determined.

English Correction Service

English Correction Service of IJASS will no longer be available free of charge. All accepted articles submitted on or after March 1st, 2015 will be held for publication unless the Associate Editor handling the manuscript finds its English is suitable in its current form or the authors pay for the English Correction Service. The IJASS English Correction Service is $200 (200,000 KRW) up to 8 pages, and $50 (50,000 KRW) for each additional page.

Beginning with Volume 13 (1), 2012, IJASS will be indexed and abstracted in:
  • Science Citation Index Expanded (also known as SciSearch®)
  • Journal Citation Reports/Science Edition
  • Current Contents®/EngineeringComputingandTechnology
The journal solicits papers from a wide range of countries. Acceptance of a submitted paper will depend on a fair technical review and on the judgment of the editors.
The journal solicits papers from a wide range of countries. Acceptance of a submitted paper will depend on a fair technical review and on the judgment of the editors. Papers must be written in a format appropriate for archival publication. Our review process allows these authors and editors an opportunity to use and develop their own expertise in a number of significant ways.
   Current Issue : Vol. 16 No. 2, June, 2015
Table of contents(Vol. 16 No.1)
ksas, vol.16, no.2, pp.0-0, 6 2015 [Abstract]
Numerical Simulation of Jet Flow Impinging on a Shielded Hartmann Whistle
Edin Michael, S. Narayanan and Abdul Jaleel. H, vol.16, no.2, pp.123-136, 6 2015 [Abstract]
Compromise Optimal Design using Control-based Analysis of Hypersonic Vehicles
Yanbin Liu and Hua bing, vol.16, no.2, pp.137-147, 6 2015 [Abstract]
Numerical Investigation of Jet Interaction for Missile with Continuous Type Side Jet Thruster
Kyoung Tai Kang, Eunseok Lee / Soogab Lee, vol.16, no.2, pp.148-156, 6 2015 [Abstract]
A Comparative Study of Numerical Methods on Aerodynamic Characteristics of a Compressor Rotor at Near-stall Condition
Donghyun Kim, Kuisoon Kim, Jeongyeol Choi and Changmin Son, vol.16, no.2, pp.157-164, 6 2015 [Abstract]
A Numerical Analysis of Supersonic Intake Buzz in an Axisymmetric Ramjet Engine
Hyo-Won Yeom, Hong-Gye Sung/ Vigor Yang, vol.16, no.2, pp.165-176, 6 2015 [Abstract]
Domain Decomposition Approach Applied for Two- and Three-dimensional Problems via Direct Solution Methodology
Jun Young Kwak , Haeseong Cho , Tae Young Chun, SangJoon Shin and Olivier A. Bauchau, vol.16, no.2, pp.177-189, 6 2015 [Abstract]
High-Velocity Impact Damage Behavior of Carbon/Epoxy Composite Laminates
Young A. Kim, Kyeongsik Woo, Hyunjun Cho, In-Gul Kim, Jong-Heon Kim, vol.16, no.2, pp.190-205, 6 2015 [Abstract]
Accurate Free Vibration Analysis of Launcher Structures Using Refined 1D Models
Erasmo Carrera, Enrico Zappino and Tommaso Cavallo, vol.16, no.2, pp.206-222, 6 2015 [Abstract]
Power Output and Efficiency of a Negative Capacitance and Inductance Shunt for Structural Vibration Control Under Broadband Excitation
Ehtesham Mustafa Qureshi, Xing Shen and Lulu Chang, vol.16, no.2, pp.223-246, 6 2015 [Abstract]
Formation Mechanism Analysis and Detection of Charged Particles in an Aero-engine Gas Path
Zhenhua Wen, Junxing Hou and ZhiQiang Jiang, vol.16, no.2, pp.247-253, 6 2015 [Abstract]
Effect of Dynamic SGS Model in a Kerosene-LOx Swirl Injector under Supercritical Condition
Jun-Young Heo, Ji-Seok Hong and Hong-Gye Sung, vol.16, no.2, pp.254-263, 6 2015 [Abstract]
A Comparative Study of Transcription Techniques for Nonlinear Optimal Control Problems Using a Pseudo-Spectral Method
Chang-Joo Kim and Sangkyung Sung, vol.16, no.2, pp.264-277, 6 2015 [Abstract]
Integrated Guidance and Control Design for the Near Space Interceptor
WANG Fei, LIU Gang/ LIANG Xiao-Geng, vol.16, no.2, pp.278-294, 6 2015 [Abstract]
Assessment of Tip Shape Effect on Rotor Aerodynamic Performance in Hover
Je Young Hwang and Oh Joon Kwon, vol.16, no.2, pp.293-310, 6 2015 [Abstract]
Drag Reduction Design for a Long-endurance Electric Powered UAV
Wonjin Jin and Yung-Gyo Lee, vol.16, no.2, pp.311-324, 6 2015 [Abstract]
The Korean Society for Aeronautical & Space Sciences
Phone : 82-2-552-4795 Fax : 82-2-552-4796 E-mail :